AUTODESK Softwares Installation Guide

DembaJuly 6, 2022
add_banner

As you know, you can activate Autodesk products in two ways: Single-User and License Server, or use on multiple systems. In order to use the single-user mode, which is practical and appropriate for many users, you can use the XFORCE keygen. FLEXNet method is also recommended for server license mode.

 

 

Tutorial on installing Autodesk 2022 and Autodesk 2023 NLM method:

1) First, make sure your antivirus is completely disabled.

2) Extract the downloaded files by WinRar software to give you the ISO file of the software. You can run this file directly in Windows 10 and 11. It is recommended to use software such as Daemon Tools, PowerISO, UltraISO, etc. to mount the image.

3) Make sure you are connected to the Internet before running the setup. After at least 1% of the software installation, you can disconnect your internet.

4) Do not run the software after the installation is complete. Download the full pack of activators. There are two methods in front of you, which are very easy on License Patcher. Please run the “Autodesk License Patcher Uninstaller.exe” file once as Run as Administrator so that if any content is already installed on your system, it will be deleted.

5) Run the “Autodesk License Patcher Ultimate.exe” file as Run as Administrator and wait for a while until the successful installation message is displayed for you.

6) Run the software. Click on “Use a network license” option. In the next window, select the Single License Server option and set the Server Name to “127.0.0.1” or “localhost”.

7) Run the software.

—————–

 

 


First method – for single user use:

Use XFORCE keygen

 

1) First, make sure that your internet is completely disconnected. It means that your device must not be online. Then install the software.

2) After the installation is complete, run the software. At the very beginning, it asks you to activate. Click on enter a serial number option.

3) In the next window, click on the Activate option. Now enter the value of the serial number in one of the following expressions (be careful not to copy the serials written below! Enter the serials manually in the software and avoid copying):

666-69696969

667-98989898

400-45454545

066-66666666

4) To enter the Product Key value for the 2019 versions, please open the file AUTODESK 2019 Product Keys.txt and for the versions 2020 the file Product keys for Autodesk products 2020.txt and get the Product Key value of your product. You can also get the complete list of product keys for Autodesk products from the following link:

——–

– View the complete list of Product Key of Autodesk products 2020

– View the complete list of Product Key of Autodesk products 2019

——–

For example, the Product Key value for AutoCAD 2019 is equal to: 001K1

For example, the Product Key value for AutoCAD 2020 is equal to: 001L1

5) Click on Next. On the Activation Options page, you will be given a statement called Request Code. Select this value and copy it with Ctrl+C. Now, you need to run the keygen file. If your operating system is 64-bit, run the xf-adesk19_x64.exe file and if it is 32-bit, run the xf-adesk19_x86.exe file as Run as Administrator.

For the 2020 versions of Autodesk products, just run the Autodesk 2020 Keymaker.exe keygen file as Run as Administrator.

6) Click on the Patch option so that the Successfully Patched message appears. Now, put the value you copied in the fifth step in the Request box and click on Generate. Copy the value generated in the Activation box completely (make sure to copy everything and not copy incompletely).

7) Return to the software environment and activate it. Click on the I have an activation code from Autodesk option. Sixteen boxes will appear for you. Right click on box number 1 and hit Paste to copy the value obtained from the sixth step.

8) Click on Next. The work is done and your software is fully activated.

Flash point: If in the fifth step, the Activation Options page does not appear for you, the reason is that you are not offline. To fix the problem, start the activation process again from the beginning (completely close the activation page and the software and run it again) until this page appears for you.


 

 

The second method – to use the license server (multi-user):

Using FlexNET

 

1) Dear users, please be careful that currently all Autodesk 2019 products are activated in the same way. There is no need for Product Code and such issues (like previous versions). Of course, you can see the Product Code of your product in the download file, in the crack folder in the Product.Keys.txt file.

2) First, make sure that your connection to the Internet is completely disconnected. Then install the software.

3) Do not run the software after the installation is complete.

4) According to your system architecture (32-bit or 64-bit), install one of the two Crack-nlm-2018-x64 or Crack-nlm-2018-x64 folders. This will install the Network License Manager on your system.

5) After installing the fourth step, replace the crack files as follows:

5-a) Copy and replace the executable file adskflex.exe in the following location:

C:/Autodesk/Network License Manager

5-b) Copy and replace the adlmint.dll file in the following location:

C:/Program Files/Common Files/Autodesk Shared/CLM/V7/MSVC14

6) This step is very important. In this step, you must edit the license file according to your system. The lic.dat file is located in the crack folder in the Autodesk Network License Manager 2018 Crack by X-Force folder. You can open this file with text editing software such as Notepad or Notepad++.

In the first line, there are two words HOSTNAME and MAC. Run the LMTools Utility software to record the appropriate values ​​(this software will be installed for you after the eighth step is successful).

Enter the System Settings tab in the software environment. Look at the two values ​​Computer/Hostname and Ethernet. These two values ​​are placed in the lic.dat file like this:

Replace HOSTNAME with Computer/Hostname

Replace the MAC statement with the Ethernet value.

It’s not over yet! Now refer to the text file License.txt in the crack folder. You should add all the contents in a new line at the end of the lic.dat file.

After you have done these three things, the lic.dat file specific to your system is ready. Save it to a permanent address that you will easily access, such as C:/lic.dat.

7) Go to the Config Services tab in the LMTools environment and fill in the values ​​as follows:

– In the Service Name section, type Autodesk.

– Enter the following executable file in the Path to the lmgrd.exe file section:

C:/Autodesk/Autodesk Network License Manager/lmgrd.exe

– In the Path to the license file section, address the license file that you have edited. In this tutorial, we have saved the license file in C:/lic.dat.

Check Use Services and then Start Server at Power Up.

8) Go to Service/License File tab. Select the Configuration using Services option and select the Autodesk option from the corresponding list. Then make sure that the LMTools ignores license file path environment variables option is ticked (that is, it is active).

9) Go to the Start/Stop/Reread tab. Click Start Server and ReRead License File respectively and make sure both are done successfully.

10) Go to the Server Status tab and click on the Perform Status Inquiry option.

11) Setting up the server is complete. Now make sure again that your internet is completely disconnected. Please note that the internet must be disconnected, not your network card or wireless card! Do not be mistaken!

12) In the initial run of the software, it asks you what license you have to activate? Click on the small option at the bottom of the window in the middle, that is, the word Help me choose.

13) Select the Multi-user option in the next window. In the next window, make sure that your tab is on Single License Server. Then enter the value of Server name exactly 127.0.0.1.

14) Click on Done. The work is done.


Tutorial on installing Autodesk products 2018

Before any action, be careful to run the Keygen file as Run as Administrator. The Keygen file is located in the KeyGen_XFORCE_2018 folder in your download file.
1) Select one of the following serial numbers as the installation serial (be careful not to copy the serials written below! Enter the serials manually in the software and avoid copying):

666-69696969
667-98989898
400-45454545
066-66666666

2) To enter the Product Key value, please open the text file AUTODESK.2019.Product.Keys.txt and get the Product Key value of your product. You can also get the complete list of product keys for Autodesk products from the following link:

——–

– View the complete list of Product Key of Autodesk products 2018

——–

For example, the Product Key value for AutoCAD 2018 is equal to: 001J1

3) Now complete the installation and restart the software. Now that you have run the software again, click on the Activate option, you will be told that your serial number is wrong. Select the Close option and select the Activate option again.
4) Now select the “I have an activation code from Autodesk” option.
5) At the moment you are in the software activation menu, go to the KeyGen_XFORCE_2018 folder and according to your software version, run one of the two 32-bit or 64-bit versions of the keygen as Run As Administrator.
6) Click on the “Patch” option so that the “successfully patched” message appears.
7) In the software activation window, you will be given a “Request Code”, copy it exactly in the keygen in the “Request” section and click on the Generate option.
8) Now copy the code received from the keygen in the software activation window and run the software.

add_banner
Categories

Leave a comment

Name *
Add a display name
Email *
Your email address will not be published